 |
Racing Calendar |
|
|
| September 2010 |
|---|
| S | M | T | W | T | F | S | | | | 1 | 2 | 3 | 4 | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 18 | | 19 | 20 | 21 | 22 | 23 | 24 | 25 | | 26 | 27 | 28 | 29 | 30 | | |
Next Offroad Race - Sat, Sep 11, 2010
Next Onroad Race - Today |
|
|
|
|
|
|
Recent Forum Posts |
|
|
|
|
|
|
|
|
|
| No Onroad Racing July 4th Weekend (Posted Friday, July 2, 2010 1:58pm) |
posted by Brian Davis |
|
|
|
Due to Hobbytown USA being closed on July 4th, the regularly scheduled race has also been cancelled. Everyone have a safe and happy holiday weekend. |
|
|
|
|
|
|
|
| Seabee Day Race Flyer (Posted Monday, April 26, 2010 4:55pm) |
posted by Brian Davis |
|
|
|
Click below for the entry from for the Seabee Day race on May 8th, 2010.
 |
|
|
|
|
|
|
|
| New Race Day/Time for Offroad (Posted Friday, October 30, 2009 6:13pm) |
posted by Brian Davis |
|
|
|
Just a reminder that starting this sunday that we're moving offroad races to sundays at 1pm. Registration starts at noon. Also, just a reminder that time changes saturday night at midnight. |
|
|
|
|
|
|
|
| transponders (Posted Sunday, August 9, 2009 1:55pm) |
posted by m henry |
|
|
|
every one that has been racing with no transponders will not be hand counted after the race on september the 19th.that should give everyone time to get them.this is all due to the complaints that they were not counted right sorry if that happened all i can say is that if you had a transponder that wouldnt have happened. |
|
|
|
|
|
|
|
| New ShortCourse Offroad Classes Announced (Posted Wednesday, July 15, 2009 11:44am) |
posted by Brian Davis |
|
|
|
After talking everything over with Mike Henry, we've come up with a solution to the SC10/Slash/Strike debate that should make everyone happy. There will now be 2 classes of ShortCourse trucks.
The first will be ShortCourse Spec. The rules for Spec are as follows-
1.) Traxxas Slash or Losi Strike trucks only.
2.) Stock 12t sealed 550 motors only. No modifications may be done to the motor, and the torque ring may not be removed.
3.) Tires must be either Traxxas Slash or Losi Strike stock tires on the stock rims of the truck they are being run on. Tire treads cannot be cut or modified.
4.) Body must be a short-course style body that totally encloses the tires when viewed from above.
5.) The only chassis modifications allowed are aluminum shock caps and RPM molded parts.
6.) Shock oils and pistons may be changed, but the springs must remain stock.
7.) Receiver and transmitter may be swapped out for the racer's preferred radio.
8.) Battery must be 2s Lipo(7.4v) or 6 cell NiMh with a capacity of 5000mah or less.
9.) Pinion and spur gear may be changed as long as they can be done without modifying the vehicle in any way.
10.) Drilling/Cutting/Lightening of the vehicle is not allowed.
The second class will be ShortCourse Pro. The rules for the Pro class are as follows-
1.) Any 2wd shortcourse truck based on an existing vehicle which fits the dimensions specified for the ROAR SCT class is allowed.
2.) Motors are limited to no less than a 4600kv brushless (10 turns), or a 17 turn brushed motor. Any speed controller which can be purchased over the counter can be used.
3.) Tires are limited to those intended for shortcourse trucks. The tires must meet the dimensions set in the ROAR SCT rules, and the tread patterns cannot be cut or modified in any manner. 1/8th scale buggy tire conversions are not allowed.
4.) Battery must be 2s Lipo(7.4v) or 6 cell NiMh with a capacity of 5000mah or less.
5.) Although excessive modification is discouraged, as long as the vehicle still meets the dimensions and weight set in the ROAR SCT rules, modifications are allowed.
6.) Trucks MUST have a front and rear bumper of a tubular rollcage design. These bumpers must remain intact during the duration of a race.
7.) Body must be a short-course style body that totally encloses the tires when viewed from above.
For further details on the Pro class, see the ROAR SCT rules below
Chassis
Wheelbase Min/Max……………………………………. 320mm / 335mm (12.59in / 13.19in)
Overall Length Min/Max……………………………….. 540mm / 568mm (21.25in / 22.36in)
Overall Width Min/Max………………………………… 290mm / 296mm (11.42in / 11.65in)
Minimum Weight……………………………………….. 74oz / 2098grams
2 Wheel Rear Drive……………………………………... Geared or Ball Differential
Rear Suspension………………………………………… Independent or Solid Axle
Tire/Wheel Specs
Wheel Inner Bead Max Diameter……………………….. 3.0 in / 76.20mm
Wheel Outer Bead Max Diameter………………………. 2.2 in / 55.88mm
Wheel Bead Width Max………………………………… 1.55 in / 39.37mm
Wheel Width Max………………………………………. 1.65 in / 41.91mm
Tire Maximum Width…(mounted)...…………………… 1.85 in / 46.99mm
Tire Diameter Min…(mounted)...………………………. 4.20 in / 106.68mm
Tire Tread……………………………………………….. Treaded, NO Cut/Custom
Body Specs
Full Fender Truck Body. Body must completely cover tires when viewed from above
NO add-on or integrated Spoilers/Wings allowed
Vehicle Height Ready to Race
Minimum Overall Height……………………………… 7.835in / 199mm |
|
|
|
|
|
|
|
| 2009 Rally for Rescues - August 8th (Posted Tuesday, June 30, 2009 7:51am) |
posted by Brian Davis |
|
|
|
We have a charity race coming up to benefit the Mobile SPCA. Prizes and awards have been generously donated by O'Reilly Auto Parts and Hobbytown USA. See the race flyer below for more details. (Click to enlarge)
You can pre-register for the event on RCSignup.com as well
http://events.rcsignup.com/events/displayEvent.cfm?ID=993 |
|
|
|
|
|
|
